CASE STUDIES

Bulk materials handling systems
Conveyor systems and elevators
Isolation gates and platforms
Flocculant Mixing System
REAGENT PLANTS

MATERIAL: Flocculant

 

EQUIPMENT: Flocculant Mixing System

 

AIM: To achieve the appropriate wetting and ageing of flocculant dry powder into flocculant solution suitable for thickener settling. 

Isolation Gates
ISOLATION GATES AND PLATFORMS

MATERIAL: Primary Crushed Iron Ore

 

EQUIPMENT: Bin Isolation Gates

 

AIM: To provide isolation of one apron feeder while the adjacent
feeder is operating from a fully loaded common bin. 

MATERIAL: Lump Iron Ore

 

EQUIPMENT: Steep Wall (Side Wall) Belt Conveyor

AIM: To gently convey and elevate iron ore lump with minimal degradation to the sample station feed point. 

Rockbreaker Mechanical Stop
CUSTOM ENGINEERED SOLUTIONS

MATERIAL: Iron Ore Crushing Circuit

EQUIPMENT: Rockbreaker Boom System

AIM: To provide a mechanical slew limit in the event of an electrical limit switch failure. 

Feeding Graphite Filtercake
SCREW FEEDERS AND CONVEYORS

MATERIAL: Graphite Filter Cake (Flake and Fines)

EQUIPMENT: Twin Screw Feeders with ribbon flights

AIM:  To achieve reliable and uniform extraction from hopper with even and controlled discharge of filter cake to process. 

Gold Ore Fines Hopper
BULK MATERIAL STORAGE

MATERIAL: Gold Ore Fines

EQUIPMENT: Belt Feeder and Fines Hopper

AIM:  To re-design the hopper to achieve a reliable mass flow and uniform extraction of ore along the full length of the hopper using the existing belt feeder. 

Conveyor Head Chute Splitter / Diverter
CUSTOM ENGINEERED SOLUTIONS

MATERIAL: Crushed Gold Ore

EQUIPMENT: Belt Conveyor Head Chute

AIM:  To reduce segregation and deliver a more uniform feed to the HPGR. 

Sliding Work Platform
ISOLATION GATES AND PLATFORMS

MATERIAL: Iron Ore Load Out Facility

EQUIPMENT: Sliding Work Platform

AIM: To design and supply a sliding work platform which can slide into position when the shut is empty for personnel access. 

Kiln Feed Screw
SCREW FEEDERS AND CONVEYORS

MATERIAL: Magnetite

EQUIPMENT: Screw Feeder

AIM:  To increase wear life and reliability and reduce downtime for maintenance.  

Sample Cutter Trolley Upgrade
CUSTOM ENGINEERED SOLUTIONS

MATERIAL: Gold Ore (crushed)

EQUIPMENT: Belt Conveyor Sample Cutter Chute and Trolley

AIM: To re-design the sample chute and trolley to increase strength and improve working life and serviceability. 

Conveyor Head Chute Diverter
CUSTOM ENGINEERED SOLUTIONS

MATERIAL: Gold Ore (Primary Crushed)

EQUIPMENT:  Belt Conveyor Head Chute

AIM: Divert and split the discharge from belt conveyor to reduce stockpile segregation in storage hopper below.  

+61 8 9332 3454   |   sales@bulkhandlingtech.com.au  

13 Panama Street,  Canning Vale,  WA 6155 

  • Grey LinkedIn Icon

Copyright 2021 Bulk Handling Technologies. All rights reserved